Contact Us

Guangdong Kingbest Electric Co.,Ltd

Address:No.1 Tongmao Idustriak Road, Dongsheng Town, Zhongshan, Guandong, China

Fax:+86-760-2367-2683

Tel:+86-760-2367-2688

Phone:+8613925329128

Email:jany@zskingbest.com

Home > News > Content
Linked To Hot Machine Using Tangtou Drip Solution Jan 18, 2017

Hung hot stamping machines use drop may be largely caused by 2 of the following:

① Hung hot does not meet temperature ironing, the correct method should be used after the steam out uniform again!

② Hanging ironing ironing brush angle too large or ironing brush upside down: when the steam through the airway when it reaches the tangtou, some steam will condense into water, careful not to make for a long time so when I use tangtou below 30 degrees. Dripping problem would not have arisen.